151 Crack Attack All Purpose Filler 310ml

Ideal for filling plaster, wood, stone, concrete, brickwork and metal, the Crack Attack All Purpose Filler by 151 is suitable for inside and outside repairs. Crack Attack leaves a super smooth finish that only requires light sanding before painting, and resists shrinking.

• 310ml
• Suitable for Interior & Exterior
• Super Smoth
• Quick Setting
• Flexible

Quick setting and versatile, the 151 Crack Attack fills most household materials and can be used to fill gaps and cracks prior to painting and decorating tasks.

Directions for use

Ensure surfaces are dry, clean and free of dust and loose materials. Once all decayed wood is removed, allow wood to dry completely and rub down gloss surfaces.

Unscrew the full nozzle and cut the tip of the cartridge, without damaging the threads. Re-attach the nozzle and unscrew the nozzle cap. Cut the tip of the nozzle at an angle of 45 degrees for the required diameter for filler.

Attach the cartridge to the caulking gun. Squeeze the trigger until the cartridge is held firmly. Apply filler by squeezing the trigger.

For optimum results, apply in layers no greater than 6mm over surfaces, pressing in well. Allow each layer to dry before applying another. Smooth filler immediately using a wet blade.

Leave to dry, which can take between 12-48 hours depending on the conditions. Protect against moisture whilst the fix is setting. Sand lightly before painting, and paint over the filler if used externally.

After use, replace the cap immediately and securely. Wash tools immediately with warm water.